Attachment 16367 Details for Bug 50819 – dmesg загрузки (Симпли 10.2 / e2c3)

dmesg загрузки (Симпли 10.2 / e2c3)

log_e2c3 (text/plain), 54.58 KB, created by AlexOrl on 2024-07-04 15:56:04 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: AlexOrl

Created: 2024-07-04 15:56:04 MSK

Size: 54.58 KB

patch

obsolete

>[    0.000000] Linux version 5.10.210-elbrus-def-alt1.20.1 (builder@localhost.localdomain) (lcc:1.26.22:Jan-10-2024:e2k-v6-linux, GNU ld (GNU Binutils) 2.36.1-26.020) #1 SMP Sat Apr 20 20:25:00 UTC 2024
>[    0.000000] found SMP MP-table
>[    0.000000] MultiProcessor Specification v1.4
>[    0.000000]     Virtual Wire compatibility mode.
>[    0.000000] OEM ID: LNXI     
>[    0.000000] Product ID: 440GX       
>[    0.000000] EPIC at: 0xFEE00000
>[    0.000000] Processor EPIC ID #0 version 1
>[    0.000000] EPIC timer frequency is 100.0 MHz
>[    0.000000] Processor EPIC ID #1 version 1
>[    0.000000] IO link #0 on node 0, version 0x11,
>[    0.000000]  connected to IOHUB: min bus #1 max bus #5 IO EPIC ID 64
>[    0.000000] System timer type 1 Version 1 at 0x60400240.
>[    0.000000] i2c_spi_info: control base addr = 0000000060400180, data base addr = 0000000060400200, IRQ 15 IOHUB revision 01
>[    0.000000] IOEPIC[0]: epic_id 64, node 0, bus 1, version 2, address 0x60500000, entries 64, GSI 0-63
>[    0.000000] Processors: 2
>[    0.000000] MSI supported
>[    0.000000] Full kernel command line: console=ttyS0,115200 console=tty0 hardreset root=UUID=152838e8-2f3f-445e-a692-899eda585500 mtdparts=spi0.0:4672k(rBOOT),64k(rWORK),64k(rDEV3),64k(rS3S4),640k(rVROM),9856k(rU_OS),-(rROOT)
>[    0.000000] Base MAC address 98:a7:b0:07:30:a0
>[    0.000000] printk: bootconsole [early-dump0] enabled
>[    0.000000] ARCH: E2K NATIVE MACHINE TYPE: e2c3 , ID 08ac, REVISION: 001, ISET #6 SERIAL # UNKNOWN
>[    0.000000] Kernel image check sum: 2040015658
>[    0.000000] cpu to cpuid map: 0->0 1->1 
>[    0.000000] Kernel loaded at phys. address 0x861400000
>[    0.000000] Booting host kernel with virtualization support
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000fffffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x00000000000c0000-0x000000005fffffff]
>[    0.000000]   node   0: [mem 0x0000000860000000-0x0000000fffffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000fffffffff]
>[    0.000000] On node 0 totalpages: 8388576
>[    0.000000]   DMA zone: 6144 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 393184 pages, LIFO batch:63
>[    0.000000]   Normal zone: 124928 pages used for memmap
>[    0.000000]   Normal zone: 7995392 pages, LIFO batch:63
>[    0.000000] On node 0, zone DMA: 32 pages in unavailable ranges
>[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff]
>[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x60000000-0x85fffffff]
>[    0.000000] DevTree: device tree size is 10626
>[    0.000000] Memory wait type idle is ON
>[    0.000000] nr_irqs_gsi: 64
>[    0.000000] percpu: Embedded 31 pages/cpu s86232 r8192 d32552 u126976
>[    0.000000] pcpu-alloc: s86232 r8192 d32552 u126976 alloc=31*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8257504
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 hardreset root=UUID=152838e8-2f3f-445e-a692-899eda585500 mtdparts=spi0.0:4672k(rBOOT),64k(rWORK),64k(rDEV3),64k(rS3S4),640k(rVROM),9856k(rU_OS),-(rROOT)
>[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
>[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
>[    0.000000] Sorting __ex_table...
>[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
>[    0.000000] MMU: Page Table entries new format V6 is used
>[    0.000000] MMU: Separate Page Tables for kernel and users
>[    0.000000] Kernel page table virt base: 0xff8000000000
>[    0.000000] User page table virt base: 0xcf8000000000
>[    0.000000] kernel virt base: 0xe20000000000, kernel virt end: 0xe20004b52000
>[    0.000000] linear mapping virt base: 0000d00000000000, last valid phaddr: 0000001000000000
>[    0.000000] Memory total mapped pages number 0x1000000 : valid 0x7fffe0, invalid 0x800020
>[    0.000000] Memory: 1584760K/33554304K available (55296K kernel code, 7549K rwdata, 3912K rodata, 3348K init, 6838K bss, 824952K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] ftrace: allocating 32094 entries in 126 pages
>[    0.000000] ftrace: allocated 126 pages with 6 groups
>[    0.000000] rcu: Hierarchical RCU implementation.
>[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
>[    0.000000] 	RCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).
>[    0.000000] 	Rude variant of Tasks RCU enabled.
>[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
>[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS: 1536, nr_irqs: 1090, preallocated irqs: 0
>[    0.000000] Node #0 IO LINK #0 is
>[    0.000000]  IO HUB controller
>[    0.000000]  ON
>[    0.000000]  connected to
>[    0.000000]  IO HUB controller
>
>[    0.000000] Console: colour dummy device 80x25
>[    0.003333] printk: console [tty0] enabled
>[    0.006666] printk: bootconsole [early-dump0] disabled
>[    0.009999] Zilog: console probe ...
>[    0.009999] Zilog: console init port 0, control_reg = 0xe40000a06080
>[    0.009999] Zilog: console init port 1, control_reg = 0xe40000a06082
>[    0.009999]  found
>[    0.009999] printk: console [ttyS0] enabled
>[    0.093333] Calibrating delay using timer specific routine.. 4002.29 BogoMIPS (lpj=6667675)
>[    0.093333] pid_max: default: 32768 minimum: 301
>[    0.093333] LSM: Security Framework initializing
>[    0.093333] Yama: becoming mindful.
>[    0.093333] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
>[    0.093333] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
>[    0.093333] BSP EPIC ID: 0
>[    0.093333] Processor frequency 1999956004
>[    0.093333] rcu: Hierarchical SRCU implementation.
>[    0.093333] smp: Bringing up secondary CPUs ...
>[    0.096666] smp: Brought up 1 node, 2 CPUs
>[    0.096666] Total of 2 processors activated
>[    0.856666] node 0 deferred pages initialised in 760ms
>[    0.856666] devtmpfs: initialized
>[    0.859999] Using FILLC/FILLR instructions
>[    0.863333] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>[    0.863333] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
>[    0.863333] NET: Registered protocol family 16
>[    0.863333] audit: initializing netlink subsys (disabled)
>[    0.863333] audit: type=2000 audit(0.863:1): state=initialized audit_enabled=0 res=1
>[    0.863333] thermal_sys: Registered thermal governor 'fair_share'
>[    0.863333] thermal_sys: Registered thermal governor 'bang_bang'
>[    0.863333] thermal_sys: Registered thermal governor 'step_wise'
>[    0.863333] thermal_sys: Registered thermal governor 'user_space'
>[    0.863333] cpuidle: using governor ladder
>[    0.863333] cpuidle: using governor menu
>[    0.863333] clocksource: lt: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044627 ns
>[    0.863333] PCI: Using Elbrus configuration type
>[    0.876666] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.876666] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.876666] iommu: Default domain type: Translated 
>[    0.876666] vgaarb: loaded
>[    0.876666] SCSI subsystem initialized
>[    0.876666] libata version 3.00 loaded.
>[    0.876666] usbcore: registered new interface driver usbfs
>[    0.876666] usbcore: registered new interface driver hub
>[    0.876666] usbcore: registered new device driver usb
>[    0.876666] pps_core: LinuxPPS API ver. 1 registered
>[    0.876666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.876666] PTP clock support registered
>[    0.879999] NetLabel: Initializing
>[    0.879999] NetLabel:  domain hash size = 128
>[    0.879999] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.879999] NetLabel:  unlabeled traffic allowed by default
>[    0.879999] PCI: Probing PCI hardware (bus 00)
>[    0.879999] PCI host bridge to bus 0000:00
>[    0.879999] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.879999] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf7fffffe]
>[    0.879999] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
>[    0.879999] pci 0000:00:00.0: clearing PCIe Enable No Snoop
>[    0.879999] pci 0000:00:00.0: [1fff:8017] type 01 class 0x060400
>[    0.879999] pci 0000:00:00.0: reg 0x10: [mem 0x60208000-0x6020803f 64bit]
>[    0.879999] pci 0000:00:1a.0: [1fff:8031] type 00 class 0x030000
>[    0.879999] pci 0000:00:1a.0: reg 0x10: [mem 0x60180000-0x601fffff 64bit]
>[    0.879999] pci 0000:00:1a.0: vgaarb: setting as boot VGA device
>[    0.879999] pci 0000:00:1a.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.879999] pci 0000:00:1a.1: [1fff:800a] type 00 class 0x040100
>[    0.879999] pci 0000:00:1a.1: reg 0x10: [mem 0x60200000-0x60203fff]
>[    0.879999] pci 0000:00:1a.2: [1fff:800a] type 00 class 0x040100
>[    0.879999] pci 0000:00:1a.2: reg 0x10: [mem 0x60204000-0x60207fff]
>[    0.879999] pci 0000:00:1b.0: clearing PCIe Enable No Snoop
>[    0.879999] pci 0000:00:1b.0: [1fff:802a] type 00 class 0x040000
>[    0.879999] pci 0000:00:1b.0: reg 0x10: [mem 0x60100000-0x6017ffff 64bit]
>[    0.879999] pci 0000:00:1c.0: [1fff:802b] type 00 class 0x040000
>[    0.879999] pci 0000:00:1c.0: reg 0x10: [mem 0x60080000-0x600fffff 64bit]
>[    0.879999] pci 0000:00:1d.0: [1fff:802c] type 00 class 0x040000
>[    0.879999] pci 0000:00:1d.0: reg 0x10: [mem 0x60040000-0x6007ffff 64bit]
>[    0.879999] pci 0000:00:1e.0: [1fff:802d] type 00 class 0x040000
>[    0.879999] pci 0000:00:1e.0: reg 0x10: [mem 0x60001000-0x60001fff 64bit]
>[    0.879999] pci 0000:00:1f.0: [1fff:802e] type 00 class 0x040000
>[    0.879999] pci 0000:00:1f.0: reg 0x10: [mem 0x60000000-0x60000fff 64bit]
>[    0.879999] pci 0000:01:00.0: [1fff:8029] type 00 class 0x0c0330
>[    0.879999] pci 0000:01:00.0: reg 0x10: [mem 0x60300000-0x603fffff 64bit]
>[    0.879999] pci 0000:01:01.0: [1fff:8027] type 00 class 0x020000
>[    0.879999] pci 0000:01:01.0: reg 0x10: [mem 0x60400000-0x6040003f]
>[    0.879999] pci 0000:01:01.1: [1fff:8027] type 00 class 0x020000
>[    0.879999] pci 0000:01:01.1: reg 0x10: [mem 0x60400040-0x6040007f]
>[    0.879999] pci 0000:01:02.0: [1fff:8025] type 00 class 0x078000
>[    0.879999] pci 0000:01:02.0: reg 0x10: [mem 0x60400080-0x6040009f]
>[    0.879999] pci 0000:01:02.0: reg 0x14: [mem 0x60400100-0x6040017f]
>[    0.879999] pci 0000:01:02.1: [1fff:8028] type 00 class 0x070200
>[    0.879999] pci 0000:01:02.1: reg 0x10: [mem 0x60400180-0x604001ff]
>[    0.879999] pci 0000:01:02.1: reg 0x14: [mem 0x60400200-0x6040023f]
>[    0.879999] pci 0000:01:02.1: reg 0x18: [mem 0x60400240-0x6040027f]
>[    0.879999] pci 0000:01:02.1: reg 0x1c: [mem 0x60500000-0x605fffff]
>[    0.879999] pci 0000:01:02.1: reg 0x20: [mem 0x60600000-0x6060007f]
>[    0.879999] pci 0000:01:02.1: MSI address at: f8000000; IOHUB generation: 2, revision: 1
>[    0.879999] pci 0000:01:02.2: [1fff:802f] type 00 class 0x078000
>[    0.879999] pci 0000:01:02.2: reg 0x10: [mem 0x60600080-0x6060008f]
>[    0.879999] pci 0000:01:02.3: [1fff:800a] type 00 class 0x040100
>[    0.879999] pci 0000:01:02.3: reg 0x10: [mem 0x60604000-0x60607fff]
>[    0.879999] pci 0000:01:03.0: [1fff:801a] type 00 class 0x010601
>[    0.879999] pci 0000:01:03.0: reg 0x10: [io  0x1000-0x1007]
>[    0.879999] pci 0000:01:03.0: reg 0x14: [io  0x1010-0x101f]
>[    0.879999] pci 0000:01:03.0: reg 0x18: [io  0x1020-0x1027]
>[    0.879999] pci 0000:01:03.0: reg 0x1c: [io  0x1030-0x103f]
>[    0.879999] pci 0000:01:03.0: reg 0x20: [io  0x1040-0x104f]
>[    0.879999] pci 0000:01:03.0: reg 0x24: [mem 0x60608000-0x60609fff]
>[    0.879999] pci 0000:01:05.0: clearing PCIe Enable No Snoop
>[    0.879999] pci 0000:01:05.0: [1fff:8032] type 01 class 0x060400
>[    0.879999] pci 0000:01:05.0: reg 0x10: [mem 0x6060a000-0x6060a03f 64bit]
>[    0.879999] pci 0000:01:05.0: Max Payload Size set to 128 (was 256, max 256)
>[    0.879999] pci 0000:01:05.0: supports D1
>[    0.879999] pci 0000:01:05.0: PME# supported from D0 D1 D3hot D3cold
>[    0.879999] pci 0000:01:06.0: clearing PCIe Enable No Snoop
>[    0.879999] pci 0000:01:06.0: [1fff:8032] type 01 class 0x060400
>[    0.883333] pci 0000:01:06.0: reg 0x10: [mem 0x60700000-0x6070003f 64bit]
>[    0.883333] pci 0000:01:06.0: Max Payload Size set to 128 (was 256, max 256)
>[    0.883333] pci 0000:01:06.0: supports D1
>[    0.883333] pci 0000:01:06.0: PME# supported from D0 D1 D3hot D3cold
>[    0.883333] pci 0000:01:07.0: clearing PCIe Enable No Snoop
>[    0.883333] pci 0000:01:07.0: [1fff:8033] type 01 class 0x060400
>[    0.883333] pci 0000:01:07.0: reg 0x10: [mem 0x60800000-0x6080003f 64bit]
>[    0.883333] pci 0000:01:07.0: Max Payload Size set to 128 (was 256, max 256)
>[    0.883333] pci 0000:01:07.0: supports D1
>[    0.883333] pci 0000:01:07.0: PME# supported from D0 D1 D3hot D3cold
>[    0.883333] pci 0000:01:08.0: clearing PCIe Enable No Snoop
>[    0.883333] pci 0000:01:08.0: [1fff:8033] type 01 class 0x060400
>[    0.883333] pci 0000:01:08.0: reg 0x10: [mem 0x60900000-0x6090003f 64bit]
>[    0.883333] pci 0000:01:08.0: Max Payload Size set to 128 (was 256, max 256)
>[    0.883333] pci 0000:01:08.0: supports D1
>[    0.883333] pci 0000:01:08.0: PME# supported from D0 D1 D3hot D3cold
>[    0.883333] pci 0000:01:09.0: [1fff:800e] type 00 class 0x000000
>[    0.883333] pci 0000:00:00.0: PCI bridge to [bus 01-05]
>[    0.883333] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
>[    0.883333] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x609fffff]
>[    0.883333] pci 0000:01:05.0: PCI bridge to [bus 02]
>[    0.883333] pci 0000:01:06.0: PCI bridge to [bus 03]
>[    0.883333] pci 0000:01:07.0: PCI bridge to [bus 04]
>[    0.883333] pci 0000:01:08.0: PCI bridge to [bus 05]
>[    0.883333] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 05
>[    0.883333] PCI->APIC IRQ transform: (D0, B1,S5,F0, P0) -> 17
>[    0.883333] PCI->APIC IRQ transform: (D0, B1,S6,F0, P0) -> 18
>[    0.883333] PCI->APIC IRQ transform: (D0, B1,S7,F0, P0) -> 19
>[    0.883333] PCI->APIC IRQ transform: (D0, B1,S8,F0, P0) -> 16
>[    0.883333] pci 0000:00:00.0: Adding to iommu group 0
>[    0.883333] pci 0000:00:1a.0: Adding to iommu group 1
>[    0.883333] pci 0000:00:1a.1: Adding to iommu group 2
>[    0.883333] pci 0000:00:1a.2: Adding to iommu group 3
>[    0.883333] pci 0000:00:1b.0: Adding to iommu group 4
>[    0.883333] pci 0000:00:1c.0: Adding to iommu group 5
>[    0.883333] pci 0000:00:1d.0: Adding to iommu group 6
>[    0.883333] pci 0000:00:1e.0: Adding to iommu group 7
>[    0.883333] pci 0000:00:1f.0: Adding to iommu group 8
>[    0.883333] pci 0000:01:00.0: Adding to iommu group 9
>[    0.883333] pci 0000:01:01.0: Adding to iommu group 10
>[    0.883333] pci 0000:01:01.1: Adding to iommu group 11
>[    0.883333] pci 0000:01:02.0: Adding to iommu group 12
>[    0.883333] pci 0000:01:02.1: Adding to iommu group 13
>[    0.883333] pci 0000:01:02.2: Adding to iommu group 14
>[    0.883333] pci 0000:01:02.3: Adding to iommu group 15
>[    0.883333] pci 0000:01:03.0: Adding to iommu group 16
>[    0.883333] pci 0000:01:05.0: Adding to iommu group 17
>[    0.883333] pci 0000:01:06.0: Adding to iommu group 18
>[    0.883333] pci 0000:01:07.0: Adding to iommu group 19
>[    0.883333] pci 0000:01:08.0: Adding to iommu group 20
>[    0.883333] pci 0000:01:09.0: Adding to iommu group 21
>[    0.886666] clocksource: Switched to clocksource lt
>[    0.936666] VFS: Disk quotas dquot_6.6.0
>[    0.936666] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.943333] NET: Registered protocol family 2
>[    0.943333] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>[    0.946666] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
>[    0.946666] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>[    0.946666] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
>[    0.946666] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.946666] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
>[    0.949999] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
>[    0.949999] NET: Registered protocol family 1
>[    0.949999] PCI: CLS 64 bytes
>[    0.949999] Trying to unpack rootfs image as initramfs...
>[    1.503333] pci 0000:01:02.0: allocated PCI BAR #0: base 0x60400080
>[    1.503333] pci 0000:01:02.0: l-gpio: L-GPIO support successfully loaded (irq base: 64).
>[    1.503333] platform l_i2c.0: Adding to iommu group 13
>[    1.503333] platform l_spi.0: Adding to iommu group 13
>[    1.503333] i2c_spi 0000:01:02.1: probed
>[    1.503333] l_i2c l_i2c.0: I2C adapter 0 registered
>[    1.503333] l_i2c l_i2c.0: I2C adapter 1 registered
>[    1.503333] l_i2c l_i2c.0: I2C adapter 2 registered
>[    1.503333] l_i2c l_i2c.0: I2C adapter 3 registered
>[    1.503333] l_i2c l_i2c.0: I2C adapter 4 registered
>[    1.503333] l_i2c l_i2c.0: I2C HW timeout: 0x7A1200
>[    1.503333] l_spi l_spi.0: probed
>[    1.503333] pci 0000:01:09.0: acpi-spmc: ACPI-SPMC support successfully loaded.
>[    1.506666] Initialise system trusted keyrings
>[    1.506666] workingset: timestamp_bits=44 max_order=23 bucket_order=0
>[    1.509999] zbud: loaded
>[    1.509999] Key type asymmetric registered
>[    1.509999] Asymmetric key parser 'x509' registered
>[    1.509999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    1.509999] io scheduler mq-deadline registered
>[    1.509999] vga16fb: initializing
>[    1.509999] vga16fb: mapped to 0x(____ptrval____)
>[    1.509999] fbcon: VGA16 VGA (fb0) is primary device
>[    1.569999] Console: switching to colour frame buffer device 80x30
>[    1.579999] fb0: VGA16 VGA frame buffer device
>[    1.579999] Serial: 85c30 driver $ 2 ports, IRQ sharing enabled
>[    1.579999] 0000:01:02.2: ttyS0 at MMIO 0x60600080 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
>[    1.579999] 0000:01:02.2: ttyS1 at MMIO 0x60600082 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
>[    1.579999] serial_zilog_probe: register IRQ #14 and set interrupt handler.
>[    1.583333] brd: module loaded
>[    1.586666] eldwcxpcs: DWC XPCS Ethernet PHY driver v1.6 2023-07-13
>[    1.586666] eldwcxpcs: no PCS modes in cmdline, use default 1G+1G
>[    1.586666] eldwcxpcs 0000:01:01.0: configure PCS MPLL on node 0: 1G+1G norm
>[    1.719999] eldwcxpcs 0000:01:01.0: PCS0[1] phy id: 0x7996ced0 - 1G/2.5G
>[    1.849999] eldwcxpcs 0000:01:01.0: vendor specific reset (VR_XS_PCS_DIG_CTRL1.15) - done
>[    1.953333] eldwcxpcs: MPLL A+ B- (0x0200)
>[    1.963333] eldwcxpcs 0000:01:01.0: vendor specific reset (VR_XS_PCS_DIG_CTRL1.15) - done
>[    1.963333] l_e1000: l_e1000_nort.c: v2.00 20.02.2020 alexmipt@mcst.ru, kalita_a@mcst.ru
>[    1.963333] sky2: driver version 1.30
>[    1.963333] mousedev: PS/2 mouse device common for all mice
>[    1.966666] rtc-ds1307 3-006f: registered as rtc0
>[    1.969999] swapper/0/-1: settimeofday 1719558978 s 500000000 ns
>[    1.969999] rtc-ds1307 3-006f: setting system clock to 2024-06-28T07:16:18 UTC (1719558978)
>[    1.969999] rtc-ds1307 3-006f: RTC dev.id=0 
>[    1.969999] sclk_register old mod -1 new 2 basic_fr_hz=99999618 m1=300000005f5df82
>[    1.969999] rtc-ds1307 3-006f: RTC dev.id=0 is used for clocksource. Alarm functionality is disabled
>[    1.969999] sclkr INFO safe_lo=46874820 53124798 fr=99999618 div=99999618 bas=99999618
>[    1.969999] wd: 
>[    1.969999] set I2C-SPI watchdog timer
>[    2.566666] Chosen C2 state dividers range 0x8:0x8
>[    2.566666] Set sclkm1.mode=1 done in all CPUs sclkr=21.468933951 sec, last sclkm1.div=99999618
>               Waiting for sclkm1.trn==0
>[    4.106666] sclkr clocksource registration at cpu 1 sclkr=23.006817545 sec, getnstod =1719558980.636588713 fr=99999619 Hz, ext=1 swOK=1 range= 0:4294967295
>[    4.106666] hid: raw HID events driver (C) Jiri Kosina
>[    4.106666] NET: Registered protocol family 10
>[    4.106666] Segment Routing with IPv6
>[    4.106666] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>[    4.106666] NET: Registered protocol family 17
>[    4.106666] Key type dns_resolver registered
>[    4.106666] NO panic2nvram_read
>[    4.106666] printk: console [tty0]: printing thread started
>[    4.106666] printk: console [ttyS0]: printing thread started
>[    4.106666] registered taskstats version 1
>[    4.106666] Loading compiled-in X.509 certificates
>[    4.573333] clocksource: sclkr: mask: 0xfffffffffff max_cycles: 0xe6a175af17b, max_idle_ns: 7052728136059 ns
>[    4.580013] clocksource: Switched to clocksource sclkr
>[    4.584125] Loaded X.509 cert 'Build time autogenerated kernel key: d841007ad33c86d712656698de68e9805a9072e1'
>[    4.584182] zswap: loaded using pool lzo/zbud
>[    4.596226] Key type encrypted registered
>[    4.596267] ima: No TPM chip found, activating TPM-bypass!
>[    4.596273] ima: Allocated hash algorithm: sha1
>[    4.596283] ima: No architecture policies found
>[    4.596307] evm: Initialising EVM extended attributes:
>[    4.596309] evm: security.selinux
>[    4.596311] evm: security.SMACK64
>[    4.596312] evm: security.SMACK64EXEC
>[    4.596314] evm: security.SMACK64TRANSMUTE
>[    4.596316] evm: security.SMACK64MMAP
>[    4.596317] evm: security.apparmor
>[    4.596318] evm: security.ima
>[    4.596320] evm: security.capability
>[    4.596322] evm: HMAC attrs: 0x1
>[    4.596644] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
>[    4.614009] Freeing unused kernel memory: 3348K
>[    4.629491] Write protected and NUMA duplicated read-only-after-init data: 44k
>[    4.629507] Run /init as init process
>[    4.629508]   with arguments:
>[    4.629509]     /init
>[    4.629511]     hardreset
>[    4.629512]   with environment:
>[    4.629513]     HOME=/
>[    4.629515]     TERM=linux
>[    6.967199] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    6.967219] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>[    6.967289] xhci_hcd 0000:01:00.0: hcc params 0x0238fe6d hci version 0x110 quirks 0x0000000000000010
>[    6.967295] xhci_hcd 0000:01:00.0: cache line size of 64 is not supported
>[    6.967435] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    6.967441] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
>[    6.967447] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
>[    6.967545] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
>[    6.967551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.967555] usb usb1: Product: xHCI Host Controller
>[    6.967559] usb usb1: Manufacturer: Linux 5.10.210-elbrus-def-alt1.20.1 xhci-hcd
>[    6.967563] usb usb1: SerialNumber: 0000:01:00.0
>[    6.967837] hub 1-0:1.0: USB hub found
>[    6.967875] hub 1-0:1.0: 4 ports detected
>[    6.968203] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
>[    6.968261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
>[    6.968266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.968271] usb usb2: Product: xHCI Host Controller
>[    6.968274] usb usb2: Manufacturer: Linux 5.10.210-elbrus-def-alt1.20.1 xhci-hcd
>[    6.968278] usb usb2: SerialNumber: 0000:01:00.0
>[    6.968493] hub 2-0:1.0: USB hub found
>[    6.968525] hub 2-0:1.0: 4 ports detected
>[    7.047929] ahci 0000:01:03.0: version 3.0
>[    7.047982] ahci 0000:01:03.0: SSS flag set, parallel bus scan disabled
>[    7.048003] ahci 0000:01:03.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
>[    7.048011] ahci 0000:01:03.0: flags: 64bit ncq stag pm led clo pio slum part ccc apst 
>[    7.074017] scsi host0: ahci
>[    7.086212] scsi host1: ahci
>[    7.098600] scsi host2: ahci
>[    7.118812] scsi host3: ahci
>[    7.118938] ata1: SATA max UDMA/133 abar m8192@0x60608000 port 0x60608100 irq 21
>[    7.118944] ata2: SATA max UDMA/133 abar m8192@0x60608000 port 0x60608180 irq 21
>[    7.118949] ata3: SATA max UDMA/133 abar m8192@0x60608000 port 0x60608200 irq 21
>[    7.118953] ata4: SATA max UDMA/133 abar m8192@0x60608000 port 0x60608280 irq 21
>[    7.219477] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    7.362813] usb 1-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
>[    7.362823] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    7.362827] usb 1-1: Product: USB Optical Mouse
>[    7.362831] usb 1-1: Manufacturer: Logitech
>[    7.432801] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    7.432947] ata1.00: ATA-11: KINGSTON A400R128GB, SBFKB1D1, max UDMA/133
>[    7.432952] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    7.433066] ata1.00: configured for UDMA/133
>[    7.433245] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON A400R12 B1D1 PQ: 0 ANSI: 5
>[    7.496127] usb 1-2: new low-speed USB device number 3 using xhci_hcd
>[    7.643743] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 3.30
>[    7.643753] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    7.643757] usb 1-2: Product: USB Keyboard
>[    7.643761] usb 1-2: Manufacturer: SIGMACHIP
>[    7.747386] ata2: SATA link down (SStatus 0 SControl 300)
>[    7.786133] usb 1-4: new high-speed USB device number 4 using xhci_hcd
>[    7.926259] usb 1-4: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice=90.15
>[    7.926270] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    7.959563] hub 1-4:1.0: USB hub found
>[    7.959686] hub 1-4:1.0: 4 ports detected
>[    8.060735] ata3: SATA link down (SStatus 0 SControl 300)
>[    8.370896] ata4: SATA link down (SStatus 0 SControl 300)
>[    8.663264] checking generic (a0000 10000) vs hw (60180000 80000)
>[    8.663271] fb0: switching to mga2 from VGA16 VGA
>[    8.675834] Console: switching to colour dummy device 80x25
>[    8.675853] mga25 0000:00:1a.0: vgaarb: deactivate vga console
>[    8.767843] i2c /dev entries driver
>[    8.926794] platform 60180400.dc: Adding to iommu group 1
>[    8.926958] mga2-crtc 60180400.dc: adding component (ops mga25_crtc_component_ops [mga25])
>[    8.927110] platform 60180800.dc: Adding to iommu group 1
>[    8.927227] mga2-crtc 60180800.dc: adding component (ops mga25_crtc_component_ops [mga25])
>[    8.927336] platform 60180c00.dc: Adding to iommu group 1
>[    8.927452] mga2-crtc 60180c00.dc: adding component (ops mga25_crtc_component_ops [mga25])
>[    8.927557] platform 601804c0.pll: Adding to iommu group 1
>[    8.927755] platform 601808c0.pll: Adding to iommu group 1
>[    8.927944] platform 60180cc0.pll: Adding to iommu group 1
>[    8.928134] platform 601804c0.pclk: Adding to iommu group 1
>[    8.928338] platform 601808c0.pclk: Adding to iommu group 1
>[    8.928537] platform 60180cc0.pclk: Adding to iommu group 1
>[    8.928742] platform 601804c0.aclk: Adding to iommu group 1
>[    8.928954] platform 601808c0.aclk: Adding to iommu group 1
>[    8.929157] platform 60180cc0.aclk: Adding to iommu group 1
>[    8.929362] platform 60181c00.pic: Adding to iommu group 1
>[    8.930255] platform 60182040.gpio: Adding to iommu group 1
>[    8.930662] platform 60182440.gpio: Adding to iommu group 1
>[    8.931061] platform 60182430.i2c: Adding to iommu group 1
>[    8.931547] platform 601c0000.vid1: Adding to iommu group 1
>[    8.932275] mga2x-hdmi 601c0000.vid1: adding component (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    8.933043] platform 60182840.gpio: Adding to iommu group 1
>[    8.933468] platform 60182830.i2c: Adding to iommu group 1
>[    8.933959] platform 601e0000.vid2: Adding to iommu group 1
>[    8.934704] mga2x-hdmi 601e0000.vid2: adding component (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    8.935340] mga25 0000:00:1a.0: trying to bring up master
>[    8.935344] mga25 0000:00:1a.0: Looking for component 0
>[    8.935348] mga25 0000:00:1a.0: found component 60180400.dc, duplicate 0
>[    8.935352] mga25 0000:00:1a.0: Looking for component 1
>[    8.935356] mga25 0000:00:1a.0: found component 60180800.dc, duplicate 0
>[    8.935360] mga25 0000:00:1a.0: Looking for component 2
>[    8.935364] mga25 0000:00:1a.0: found component 60180c00.dc, duplicate 0
>[    8.935368] mga25 0000:00:1a.0: Looking for component 3
>[    8.935372] mga25 0000:00:1a.0: found component 601c0000.vid1, duplicate 0
>[    8.935375] mga25 0000:00:1a.0: Looking for component 4
>[    8.935379] mga25 0000:00:1a.0: found component 601e0000.vid2, duplicate 0
>[    8.935383] mga25 0000:00:1a.0: Looking for component 5
>[    8.935386] mga25 0000:00:1a.0: found component 601c0000.vid1, duplicate 1
>[    8.935390] mga25 0000:00:1a.0: Looking for component 6
>[    8.935394] mga25 0000:00:1a.0: found component 601e0000.vid2, duplicate 1
>[    8.935397] mga25 0000:00:1a.0: Looking for component 7
>[    8.935401] mga25 0000:00:1a.0: found component 601c0000.vid1, duplicate 1
>[    8.935405] mga25 0000:00:1a.0: Looking for component 8
>[    8.935408] mga25 0000:00:1a.0: found component 601e0000.vid2, duplicate 1
>[    8.935413] mga25 0000:00:1a.0: binding 60180400.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935573] mga25 0000:00:1a.0: bound 60180400.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935605] mga25 0000:00:1a.0: binding 60180800.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935710] mga25 0000:00:1a.0: bound 60180800.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935742] mga25 0000:00:1a.0: binding 60180c00.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935842] mga25 0000:00:1a.0: bound 60180c00.dc (ops mga25_crtc_component_ops [mga25])
>[    8.935875] mga25 0000:00:1a.0: binding 601c0000.vid1 (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    8.935997] mga2x-hdmi 601c0000.vid1: Detected HDMI TX controller v2.14a without HDCP (DWC HDMI 2.0 TX PHY)
>[    8.987107] mga2x-hdmi 601c0000.vid1: EVENT=plugin
>[    8.997736] mga2x-hdmi 601c0000.vid1: hdmi_set_clk_regenerator: fs=48000Hz ftdms=74.250MHz N=6144 cts=74250
>[    8.997806] platform dw-hdmi-cec.0.auto: Adding to iommu group 1
>[    8.997933] mga25 0000:00:1a.0: bound 601c0000.vid1 (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    8.998006] mga25 0000:00:1a.0: binding 601e0000.vid2 (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    8.998160] mga2x-hdmi 601e0000.vid2: Detected HDMI TX controller v2.14a without HDCP (DWC HDMI 2.0 TX PHY)
>[    9.032078] mga2x-hdmi 601e0000.vid2: hdmi_set_clk_regenerator: fs=48000Hz ftdms=74.250MHz N=6144 cts=74250
>[    9.032145] platform dw-hdmi-cec.1.auto: Adding to iommu group 1
>[    9.032265] mga25 0000:00:1a.0: bound 601e0000.vid2 (ops __mod_of__mga25_pic_dt_match_device_table [mga25])
>[    9.036693] mga2x-hdmi 601c0000.vid1: read_hpd result: 1
>[    9.074922] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[    9.075892] [drm] fb is 1920x1080-24
>[    9.075899] [drm]    pitch is 7680
>[    9.076133] fbcon: mga2drmfb (fb0) is primary device
>[    9.076425] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[    9.076503] mga2x-hdmi 601c0000.vid1: CEA mode used vic=16
>[    9.076508] mga2x-hdmi 601c0000.vid1: final pixclk = 148500000
>[    9.076512] mga2x-hdmi 601c0000.vid1: final tmdsclock = 148500000
>[    9.076529] mga2x-hdmi 601c0000.vid1: sink has audio support
>[    9.076534] mga2x-hdmi 601c0000.vid1: hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
>[    9.076550] mga2x-hdmi 601c0000.vid1: dw_hdmi_setup HDMI mode
>[    9.076593] mga2x-hdmi 601c0000.vid1: PHY powered down in 0 iterations
>[    9.084656] mga2x-hdmi 601c0000.vid1: PHY PLL locked 1 iterations
>[    9.084670] mga2x-hdmi 601c0000.vid1: PHY powered down in 0 iterations
>[    9.092724] mga2x-hdmi 601c0000.vid1: PHY PLL locked 1 iterations
>[    9.093108] Console: switching to colour frame buffer device 240x67
>[    9.093161] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[    9.116650] mga25 0000:00:1a.0: [drm] fb0: mga2drmfb frame buffer device
>[    9.129814] [drm] Initialized mga2 1.2.0 20221102 for 0000:00:1a.0 on minor 0
>[    9.149571] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input0
>[    9.149749] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-1/input0
>[    9.157965] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-2/1-2:1.0/0003:1C4F:0002.0002/input/input1
>[    9.215141] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:01:00.0-2/input0
>[    9.233137] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-2/1-2:1.1/0003:1C4F:0002.0003/input/input2
>[    9.236353] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[    9.236821] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[    9.244081] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
>[    9.244106] sd 0:0:0:0: [sda] Write Protect is off
>[    9.244110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    9.244142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    9.261933]  sda: sda1 sda2 sda3
>[    9.269862] sd 0:0:0:0: [sda] Attached SCSI disk
>[    9.293403] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-2/1-2:1.1/0003:1C4F:0002.0003/input/input3
>[    9.293487] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:01:00.0-2/input1
>[    9.293590] usbcore: registered new interface driver usbhid
>[    9.293593] usbhid: USB HID core driver
>[   10.651533] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   10.804644] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   11.057301] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
>[   11.057309] EXT4-fs (sda3): write access will be enabled during recovery
>[   12.051685] EXT4-fs (sda3): orphan cleanup on readonly fs
>[   12.051775] EXT4-fs (sda3): 2 orphan inodes deleted
>[   12.051779] EXT4-fs (sda3): recovery complete
>[   12.062668] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[   15.045124] systemd[1]: Inserted module 'autofs4'
>[   15.079765] systemd[1]: systemd v249.16-alt2.E2K.2 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
>[   15.079859] systemd[1]: Detected architecture e2k.
>[   15.082431] systemd[1]: Hostname set to <BITBLAZE>.
>[   15.208383] systemd-sysv-generator[3996]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   15.221583] systemd-sysv-generator[3996]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   15.243150] systemd-sysv-generator[3996]: SysV service '/etc/rc.d/init.d/pwmd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   15.430386] systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock â /run/cups/cups.sock; please update the unit file accordingly.
>[   15.438042] systemd[1]: /lib/systemd/system/anacron.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
>[   15.438063] systemd[1]: /lib/systemd/system/anacron.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
>[   15.527368] systemd[1]: Queued start job for default target Graphical Interface.
>[   15.529824] random: systemd: uninitialized urandom read (16 bytes read)
>[   15.531038] systemd[1]: Created slice Slice /system/getty.
>[   15.531391] random: systemd: uninitialized urandom read (16 bytes read)
>[   15.532235] systemd[1]: Created slice Slice /system/modprobe.
>[   15.532458] random: systemd: uninitialized urandom read (16 bytes read)
>[   15.533424] systemd[1]: Created slice Slice /system/serial-getty.
>[   15.534483] systemd[1]: Created slice Slice /system/systemd-fsck.
>[   15.535582] systemd[1]: Created slice Slice /system/vconsole-setup-kludge.
>[   15.536382] systemd[1]: Created slice User and Session Slice.
>[   15.536773] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>[   15.537460] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   15.537841] systemd[1]: Reached target Local Encrypted Volumes.
>[   15.538121] systemd[1]: Reached target Preparation for Network.
>[   15.538316] systemd[1]: Reached target User and Group Name Lookups.
>[   15.538522] systemd[1]: Reached target Remote Encrypted Volumes.
>[   15.538736] systemd[1]: Reached target Slice Units.
>[   15.538960] systemd[1]: Reached target Local Verity Protected Volumes.
>[   15.539775] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[   15.540282] systemd[1]: Listening on LVM2 poll daemon socket.
>[   15.540619] systemd[1]: Listening on initctl Compatibility Named Pipe.
>[   15.541321] systemd[1]: Listening on Journal Audit Socket.
>[   15.541777] systemd[1]: Listening on Journal Socket (/dev/log).
>[   15.542270] systemd[1]: Listening on Journal Socket.
>[   15.542889] systemd[1]: Listening on udev Control Socket.
>[   15.543320] systemd[1]: Listening on udev Kernel Socket.
>[   15.544146] systemd[1]: Listening on User Database Manager Socket.
>[   15.546707] systemd[1]: Mounting Huge Pages File System...
>[   15.549161] systemd[1]: Mounting POSIX Message Queue File System...
>[   15.551893] systemd[1]: Mounting Kernel Debug File System...
>[   15.557975] systemd[1]: Mounting Kernel Trace File System...
>[   15.562903] systemd[1]: Starting Create List of Static Device Nodes...
>[   15.566994] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[   15.570658] systemd[1]: Starting Load Kernel Module configfs...
>[   15.587990] systemd[1]: Starting Load Kernel Module dm_mod...
>[   15.596996] systemd[1]: Starting Load Kernel Module drm...
>[   15.609987] systemd[1]: Starting Load Kernel Module efi_pstore...
>[   15.626235] systemd[1]: Starting Load Kernel Module fuse...
>[   15.627869] device-mapper: uevent: version 1.0.3
>[   15.633652] systemd[1]: Starting Load Kernel Module loop...
>[   15.635883] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
>[   15.641914] systemd[1]: Starting File System Check on Root Device...
>[   15.646842] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
>[   15.646852] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
>[   15.650097] systemd[1]: Starting Journal Service...
>[   15.667649] fuse: init (API version 7.32)
>[   15.674632] systemd[1]: Starting Load Kernel Modules...
>[   15.684916] systemd[1]: Starting Coldplug All udev Devices...
>[   15.691176] systemd[1]: Starting Setup Virtual Console on tty1...
>[   15.699136] systemd[1]: Mounted Huge Pages File System.
>[   15.714867] systemd[1]: Mounted POSIX Message Queue File System.
>[   15.718894] systemd[1]: Mounted Kernel Debug File System.
>[   15.723533] systemd[1]: Mounted Kernel Trace File System.
>[   15.730843] systemd[1]: Finished Create List of Static Device Nodes.
>[   15.735236] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>[   15.736325] systemd[1]: Finished Load Kernel Module configfs.
>[   15.740662] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
>[   15.741154] systemd[1]: Finished Load Kernel Module dm_mod.
>[   15.746884] systemd[1]: modprobe@drm.service: Deactivated successfully.
>[   15.747433] systemd[1]: Finished Load Kernel Module drm.
>[   15.752244] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
>[   15.752818] systemd[1]: Finished Load Kernel Module efi_pstore.
>[   15.757489] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>[   15.758204] systemd[1]: Finished Load Kernel Module fuse.
>[   15.767727] systemd[1]: Mounting FUSE Control File System...
>[   15.775909] systemd[1]: Mounting Kernel Configuration File System...
>[   15.796229] loop: module loaded
>[   15.810138] systemd[1]: Starting Create Static Device Nodes in /dev...
>[   15.827218] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   15.886749] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[   15.891032] systemd[1]: modprobe@loop.service: Deactivated successfully.
>[   15.894562] systemd[1]: Finished Load Kernel Module loop.
>[   15.903864] systemd[1]: Finished File System Check on Root Device.
>[   15.915384] systemd[1]: Mounted FUSE Control File System.
>[   15.925478] systemd[1]: Mounted Kernel Configuration File System.
>[   15.937084] systemd[1]: Starting Remount Root and Kernel File Systems...
>[   15.944804] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
>[   15.959556] systemd[1]: Finished Load Kernel Modules.
>[   15.966172] systemd[1]: Finished Create Static Device Nodes in /dev.
>[   15.980112] systemd[1]: Starting Apply Kernel Variables...
>[   16.032881] EXT4-fs (sda3): re-mounted. Opts: (null)
>[   16.050064] systemd[1]: Finished Setup Virtual Console on tty1.
>[   16.058079] systemd[1]: Finished Remount Root and Kernel File Systems.
>[   16.070812] systemd[1]: Finished Apply Kernel Variables.
>[   16.082627] systemd[1]: Started Journal Service.
>[   16.133751] systemd-journald[4014]: Received client request to flush runtime journal.
>[   16.143992] systemd-journald[4014]: File /var/log/journal/1b37a7617115db8c2a712da2667bd86f/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[   16.309439] random: crng init done
>[   16.309444] random: 77 urandom warning(s) missed due to ratelimiting
>[   16.761983] mgb 0000:01:01.0: devicetree for node not found!
>[   16.761991] mgb 0000:01:01.0: initializing PCI device 1fff:8027
>[   16.762022] mgb 0000:01:01.0: MAC = 98A7B00730A0
>[   16.802931] 0-MPV EIOH IDs: DEV=0x8014 VEND=0x1fff REV=0x0 drv.ver.20404 IRQ 0=9 IRQ 1=10 IRQ 2=11, BUS =0000:01:02.0, picoseconds per counter clock = 2082
>[   16.810250] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
>[   16.853845] mgb 0000:01:01.0: found external phy id 0x001CC916 - Realtek RTL8211F
>[   16.853854] mgb 0000:01:01.0: register mdiobus mgb-108 with phy mgb-108:00
>[   16.854267] mgb 0000:01:01.0: pcs[1] id: 0x7996ced0 - 1G/2.5G
>[   16.855190] MPV: pps mpv_in:1 is enabled.
>[   16.855414] mgb 0000:01:01.0: send_pps_mpv() OK
>[   16.855418] mgb 0000:01:01.0: registered PHC clock
>[   16.855441] mgb 0000:01:01.0: network interface eth0 init done
>[   16.855532] mgb 0000:01:01.1: devicetree for node not found!
>[   16.855537] mgb 0000:01:01.1: initializing PCI device 1fff:8027
>[   16.855564] mgb 0000:01:01.1: MAC = 98A7B00730A1
>[   16.859651] mgb 0000:01:01.1: register mdiobus mgb-109 (no external phy)
>[   16.860197] mgb 0000:01:01.1: pcs[1] id: 0x7996ced0 - 1G/2.5G
>[   16.860852] MPV: pps mpv_in:1 is enabled.
>[   16.863163] mgb 0000:01:01.1: send_pps_mpv() OK
>[   16.863170] mgb 0000:01:01.1: registered PHC clock
>[   16.863195] mgb 0000:01:01.1: network interface eth1 init done
>[   16.876190] net eth0: Clause 37(SGMII) Auto-Negotiation: passed
>[   16.904201] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
>[   16.904806] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
>[   16.938495] at24 3-0050: supply vcc not found, using dummy regulator
>[   16.956265] at24 3-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
>[   16.956389] at24 3-0057: supply vcc not found, using dummy regulator
>[   16.967231] at24 3-0057: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
>[   16.978224] i2c i2c-2: Added multiplexed i2c bus 7
>[   16.978360] i2c i2c-2: Added multiplexed i2c bus 8
>[   16.978478] i2c i2c-2: Added multiplexed i2c bus 9
>[   16.978596] i2c i2c-2: Added multiplexed i2c bus 10
>[   16.978601] ltc4306 2-0058: registered 4 multiplexed busses for I2C switch ltc4306
>[   17.091743] snd_hda_intel 0000:00:1a.1: enabling device (0000 -> 0002)
>[   17.091974] snd_hda_intel 0000:00:1a.2: enabling device (0000 -> 0002)
>[   17.136659] input: HDA MCST HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1a.2/sound/card1/input5
>[   17.138321] input: HDA MCST HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1a.1/sound/card0/input4
>[   17.140520] snd_hda_codec_realtek hdaudioC2D0: ALC262: SKU not ready 0x00000100
>[   17.141268] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[   17.141279] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   17.141285] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   17.141291] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
>[   17.141294] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x11/0x1e
>[   17.141298] snd_hda_codec_realtek hdaudioC2D0:    inputs:
>[   17.141303] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
>[   17.141307] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
>[   17.141311] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
>[   17.141315] snd_hda_codec_realtek hdaudioC2D0:      CD=0x1c
>[   17.165198] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input6
>[   17.165365] input: HDA MCST Rear Mic as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input7
>[   17.165519] input: HDA MCST Front Mic as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input8
>[   17.165669] input: HDA MCST Line as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input9
>[   17.165820] input: HDA MCST Line Out as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input10
>[   17.165974] input: HDA MCST Front Headphone as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card2/input11
>[   17.242683] hantrodec 0000:00:1f.0: enabling device (0000 -> 0002)
>[   17.242696] hantrodec: dec/pp kernel module. 
>[   17.242698] hantrodec: Init single core at 0x60000000 IRQ=39
>[   17.242708] hantrodec: Core 0 HW ID=0x67320208
>[   17.242711] hantrodec: Supported HW found at 0x60000000
>[   17.242713] hantrodec: core[0] has HEVC
>[   17.242715] hantrodec: core[0] has VP9
>[   17.242716] hantrodec: core[0] has PP
>[   17.244043] hantrodec: module inserted. Major = 241
>[   17.266431] vxd_pci 0000:00:1d.0: enabling device (0000 -> 0002)
>[   17.266443] vxd_pci 0000:00:1d.0: vxd_plat_probe dma_get_mask : 0xffffffffff
>[   17.266447] vxd_pci 0000:00:1d.0: vxd_plat_probe dev->dma_mask : 000000006edc427c : 0xffffffffff
>[   17.266453] vxd_pci 0000:00:1d.0: vxd_plat_probe dma_set_mask 0xffffffffff
>[   17.266674] vxd_pci 0000:00:1d.0: vxd_add_dev: hw:8.15.2, num_pix: 3, num_ent: 1, mmu: 40, MTX RAM: 135168 (132KB)
>[   17.266684] img_mem_add_heap created heap 1 type 1 (unified)
>[   17.266688] img_mem_add_heap created heap 2 type 4 (dmabuf)
>[   17.267495] vxd_pci 0000:00:1d.0: Direct firmware load for pvdec_full_bin.fw failed with error -2
>[   17.267504] vxd_pci 0000:00:1d.0: vxd_prepare_fw: failed to fetch firmware (err:-2)!
>[   17.267508] vxd_pci 0000:00:1d.0: vxd_add_dev: pvdec_full_bin.fw acquire failed!
>[   17.267512] vxd_deinit: Total kernel memory used: 0.0 MB
>[   17.267521] vxd_pci 0000:00:1d.0: failed to intialize driver core!
>[   17.267547] vxd_pci: probe of 0000:00:1d.0 failed with error -2
>[   17.296231] Adding 29826156k swap on /dev/sda2.  Priority:-2 extents:1 across:29826156k SSFS
>[   17.327904] bige: Initializing
>[   17.327920] pci 0000:00:1e.0: enabling device (0000 -> 0002)
>[   17.327931] bige: BAR 0 is located at 0x60001000 and is 4096 bytes
>[   17.327938] bige: IRQ = 38
>[   17.328735] e2c3-gpu 0000:00:1b.0: enabling device (0000 -> 0002)
>[   17.328808] platform e2c3_gpu_rogue.2.auto: Adding to iommu group 4
>[   17.329210] bige: module inserted. Major = 239
>[   17.352867] imgvideo: Loadable Module, version 1.0.0
>[   17.354858] imgvideo: Loaded
>[   17.387515] imgpciif 0000:00:1c.0: enabling device (0000 -> 0002)
>[   17.387539] pciprobe_func bar 0 address 0x60080000 size 0x80000 km addr 0x000000001c1bdd99
>[   17.648511] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
>[   17.654956] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
>[   17.990685] mgb 0000:01:01.1 enp1s1f1: renamed from eth1
>[   18.022083] mgb 0000:01:01.0 enp1s1f0: renamed from eth0
>[   18.074006] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   18.126753] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   18.359931] PVR_K:  4818: Read BVNC 4.46.6.62 from HW device registers
>[   18.359940] PVR_K:  4818: RGX Device registered with BVNC 4.46.6.62
>[   18.360485] [drm] Initialized pvr 1.13.5878540 20170530 for e2c3_gpu_rogue.2.auto on minor 1
>[   20.052770] net enp1s1f1: Clause 73 Auto-Negotiation: failed
>[   20.923253] RTL8211F Gigabit Ethernet mgb-108:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=mgb-108:00, irq=POLL)
>[   20.923625] mgb 0000:01:01.0 enp1s1f0: Link is Down
>[   21.369833] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   21.370561] pvrsrvkm e2c3_gpu_rogue.2.auto: Direct firmware load for rgx.fw.4.46.6.62 failed with error -2
>[   21.372923] pvrsrvkm e2c3_gpu_rogue.2.auto: Direct firmware load for rgx.fw.4.46p.6.62 failed with error -2
>[   21.374603] pvrsrvkm e2c3_gpu_rogue.2.auto: Direct firmware load for rgx.fw failed with error -2
>[   21.374619] PVR_K:(Fatal):  5333: All RGX Firmware image loads failed for 'rgx.fw.4.46.6.62' [1585]
>[   21.374624] PVR_K:(Error):  5333: RGXInit: InitFirmware failed (4) [1368]
>[   21.374629] PVR_K:(Error):  5333: RGXInit() failed (PVRSRV_ERROR_INIT_FAILURE) in PVRSRVCommonDeviceInitialise() [2357]
>[   21.374635] PVR_K:(Error):  5333: PVRSRVDeviceFinalise() failed (PVRSRV_ERROR_NOT_INITIALISED) in PVRSRVCommonDeviceInitialise() [2366]
>[   21.374643] PVR_K:(Error):  5333: PVRSRVDeviceOpen: Failed to initialise device (PVRSRV_ERROR_NOT_INITIALISED) [462]
>[   21.432242] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   22.441550] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   22.472475] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   22.491318] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   22.915188] PVR_K:(Error):  5333: PVRSRVDeviceOpen: Driver already in bad state. Device open failed. [451]
>[   22.933175] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   22.944475] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   22.961090] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   23.973914] net enp1s1f0: link up, 1000Mbps, full-duplex
>[   23.973928] mgb 0000:01:01.0 enp1s1f0: Link is Up - 1Gbps/Full - flow control rx/tx
>[   23.973951] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s1f0: link becomes ready
>[   23.996167] net enp1s1f0: Clause 37(SGMII) Auto-Negotiation: passed
>[   24.567723] PVR_K:(Error):  5495: PVRSRVDeviceOpen: Driver already in bad state. Device open failed. [451]
>[   30.851178] systemd-journald[4014]: Failed to read journal file /var/log/journal/1b37a7617115db8c2a712da2667bd86f/user-500.journal for rotation, trying to move it out of the way: Device or resource busy
>[   33.239559] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   33.317954] PVR_K:(Error):  5905: PVRSRVDeviceOpen: Driver already in bad state. Device open failed. [451]
>[   34.456861] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   37.657308] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   37.710146] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[   37.759050] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   37.759349] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001
>[   47.617588] usb 1-4.3: new high-speed USB device number 5 using xhci_hcd
>[   47.708356] usb 1-4.3: New USB device found, idVendor=1f75, idProduct=0903, bcdDevice= 0.01
>[   47.708367] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[   47.708371] usb 1-4.3: Product: V03S SLC
>[   47.708375] usb 1-4.3: Manufacturer: eVtran
>[   47.708378] usb 1-4.3: SerialNumber: 2538558910
>[   47.742564] usb-storage 1-4.3:1.0: USB Mass Storage device detected
>[   47.743740] scsi host4: usb-storage 1-4.3:1.0
>[   47.746579] usbcore: registered new interface driver usb-storage
>[   47.758243] usbcore: registered new interface driver uas
>[   50.827959] scsi 4:0:0:0: Direct-Access     eVtran   V03S SLC         1.00 PQ: 0 ANSI: 6
>[   50.831968] sd 4:0:0:0: [sdb] 62411243 512-byte logical blocks: (32.0 GB/29.8 GiB)
>[   50.832102] sd 4:0:0:0: [sdb] Write Protect is off
>[   50.832107] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
>[   50.832237] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
>[   50.846362]  sdb: sdb1
>[   50.861689] sd 4:0:0:0: [sdb] Attached SCSI removable disk
>[   61.493888] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[  279.514571] systemd-sysv-generator[6713]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[  279.528890] systemd-sysv-generator[6713]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[  279.538382] systemd-sysv-generator[6713]: SysV service '/etc/rc.d/init.d/pwmd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[  319.622534] PVR_K:(Error):  6760- 6771: PVRSRVDeviceOpen: Driver already in bad state. Device open failed. [451]
>[  319.652736] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[  319.683357] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[  320.281538] PVR_K:(Error):  6760- 6787: PVRSRVDeviceOpen: Driver already in bad state. Device open failed. [451]
>[  320.311725] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[  320.342324] mga2x-hdmi 601c0000.vid1: got edid: width[53] x height[30]
>[  320.903492] mga2x-hdmi 601c0000.vid1: input format 0x100a, output format 0x0001

Actions: View

Attachments on bug 50819: 16367 | 16368 | 16369 | 16370