Attachment 3123 Details for Bug 18099 – Вывод dmesg в конфигурации с powermgmt+hibernate

Вывод dmesg в конфигурации с powermgmt+hibernate

dmesg.log (text/x-log), 120.84 KB, created by Лаврущенко Александр on 2008-12-07 15:51:54 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Лаврущенко Александр

Created: 2008-12-07 15:51:54 MSK

Size: 120.84 KB

patch

obsolete

>ages, LIFO batch:31
>  HighMem zone: 237 pages used for memmap
>  HighMem zone: 30179 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI present.
>ACPI: RSDP 000F7BF0, 0024 (r2 PTLTD )
>ACPI: XSDT 3F6D14BC, 0094 (r1 ACRSYS ACRPRDCT  6040000 INNA        0)
>ACPI: FACP 3F6DBBD7, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
>ACPI: DSDT 3F6D2BC9, 8F9A (r2 INTEL  CRESTLNE  6040000 MSFT  3000000)
>ACPI: FACS 3F6DEFC0, 0040
>ACPI: HPET 3F6DBCCB, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: MCFG 3F6DBD03, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: TCPA 3F6DBD3F, 0032 (r1 Intel   CRESTLN  6040000          5A52)
>ACPI: TMOR 3F6DBD71, 0026 (r1 PTLTD            6040000 PTL         3)
>ACPI: SLIC 3F6DBD97, 0176 (r1 ACRSYS ACRPRDCT  6040000 ANNI        1)
>ACPI: ASF! 3F6DBF0D, 0063 (r32 OEMID  OEMTBL    6040000 PTL         1)
>ACPI: APIC 3F6DBF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 3F6DBFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 3F6D28EC, 02DD (r1 SataRe SataAhci     1000 INTL 20050624)
>ACPI: SSDT 3F6D2721, 01CB (r1 BrtRef  DD01BRT     1000 INTL 20050624)
>ACPI: SSDT 3F6D1ADC, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT 3F6D1A36, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT 3F6D1550, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: DMI detected: Acer
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257763
>Kernel command line: root=UUID=97a70c77-58c9-4113-865e-f51691e6ba7e resume=/dev/sda6 vga=0x361 panic=30 splash=verbose showopts quiet 
>bootsplash: verbose mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.320 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1023884k/1039168k available (2298k kernel code, 14492k reserved, 804k data, 392k init, 121664k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe13000 - 0xfffff000   (1968 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc050f000 - 0xc0571000   ( 392 kB)
>      .data : 0xc043ea0e - 0xc0507ba0   ( 804 kB)
>      .text : 0xc0200000 - 0xc043ea0e   (2298 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3995.00 BogoMIPS (lpj=7990017)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.38 BogoMIPS (lpj=7980779)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Total of 2 processors activated (7985.39 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1792 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
>system 00:08: ioport range 0x800-0x80f has been reserved
>system 00:08: ioport range 0x1000-0x107f has been reserved
>system 00:08: ioport range 0x1180-0x11bf has been reserved
>system 00:08: ioport range 0xfe00-0xfe00 has been reserved
>system 00:08: iomem range 0xff800000-0xff800fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 0xf6000000-0xf7ffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: 0xf8000000-0xf9ffffff
>  PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: 0xfa000000-0xfbffffff
>  PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
>PCI: Bus 16, cardbus bridge: 0000:0f:06.0
>  IO window: 0x00005000-0x000050ff
>  IO window: 0x00005400-0x000054ff
>  PREFETCH window: 0x50000000-0x53ffffff
>  MEM window: 0x58000000-0x5bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: 0xfc200000-0xfc2fffff
>  PREFETCH window: 0x0000000050000000-0x0000000053ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1350k freed
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1228503920.452:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7616k, total 7616k
>vesafb: mode is 1280x800x16, linelength=2560, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 19288 bytes
>bootsplash: ...found (1280x800, 9851 bytes, v3).
>Console: switching to colour frame buffer device 156x46
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 392k freed
>Write protecting the kernel read-only data: 616k
>Executing init=/init
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>No dock devices found.
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 220
>ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 220
>ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>ACPI: SSDT 3F6D23DF, 027A (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 3F6D1D3B, 061F (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F6D2659, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 3F6D235A, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: WMI: Mapper loaded
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>input: Acer hotkey driver as /devices/virtual/input/input2
>Acer Travelmate hotkey driver v0.5.35
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>Linux agpgart interface v0.103
>ACPI: Thermal Zone [TZS0] (57 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (52 C)
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (off-line)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>USB Universal Host Controller Interface driver v3.0
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: Battery Slot [BAT0] (battery present)
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>iTCO_vendor_support: vendor-support=0
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Real Time Clock Driver v1.12ac
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>usb 1-1: configuration #1 chosen from 1 choice
>NET: Registered protocol family 23
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>usb 1-1: New USB device found, idVendor=5986, idProduct=0102
>usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-1: Product: Acer Crystal Eye webcam
>ACPI: PCI interrupt for device 0000:04:00.0 disabled
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 22
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Linux video capture interface: v2.00
>uvcvideo: no version for "v4l_compat_ioctl32" found: kernel tainted.
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>Adding 2971984k swap on /dev/sda6.  Priority:-1 extents:1 across:2971984k
>EXT3 FS on sda1, internal journal
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>Clocksource tsc unstable (delta = -443337322 ns)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>warning: `dnsmasq' uses 32-bit capabilities (legacy support in use)
>[drm] Initialized drm 1.1.0 20060810
>PCI: Unable to reserve mem region #3:10000000@d0000000 for device 0000:00:02.0
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.13.0 20080312 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 19288 bytes
>bootsplash: ...found (1280x800, 9851 bytes, v3).
>bootsplash: status on console 1 changed to on
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100102, writing 100106)
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>NET: Registered protocol family 17
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>powersaved[7464]: segfault at ad ip b7e8e9ec sp bfdcbbfc error 4 in libdbus-1.so.3.4.0[b7e67000+35000]
>ACPI: PCI interrupt for device 0000:04:00.0 disabled
>NET: Unregistered protocol family 17
>device-mapper: core: cleaned up
>usbcore: deregistering interface driver uvcvideo
>nsc-ircc 00:0a: disabled
>ACPI: PCI interrupt for device 0000:0f:06.3 disabled
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>iTCO_wdt: Watchdog Module Unloaded.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>uhci_hcd 0000:00:1d.2: remove, state 4
>usb usb7: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 7 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 4
>usb usb6: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 6 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 4
>usb usb5: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1a.1: remove, state 4
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1a.1: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: remove, state 4
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1a.0: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ehci_hcd 0000:00:1d.7: remove, state 4
>usb usb2: USB disconnect, address 1
>ehci_hcd 0000:00:1d.7: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1a.7: remove, state 1
>usb usb1: USB disconnect, address 1
>usb 1-1: USB disconnect, address 2
>ehci_hcd 0000:00:1a.7: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>acerhk: removed.
>acer-wmi: Acer Laptop WMI Extras unloaded
>ACPI: PCI interrupt for device 0000:0f:06.2 disabled
>ata4.00: disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>NET: Unregistered protocol family 23
>iTCO_vendor_support: Module Unloaded
>usbcore: deregistering device driver usb
>usbcore: deregistering interface driver usbfs
>usbcore: deregistering interface driver hub
>Uniform CD-ROM driver unloaded
>ACPI: WMI: Mapper unloaded
>Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Shrinking memory...  -\|/-\|/-\done (112683 pages freed)
>PM: Freed 450732 kbytes in 1.13 seconds (398.87 MB/s)
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Preparing to enter system sleep state S4
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>PM: Creating hibernation image: 
>PM: Need to copy 124455 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.48 BogoMIPS (lpj=7980970)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>Switched to high resolution mode on CPU 1
>CPU1 is up
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Writing back config space on device 0000:00:1a.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.2 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing cebe0000)
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 40100102)
>PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b)
>PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820)
>PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007)
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100102, writing 2100502)
>PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100106, writing 2100102)
>sd 0:0:0:0: [sda] Starting disk
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: _GTF unexpected object type 0x1
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Restarting tasks ... done.
>NET: Registered protocol family 17
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Linux video capture interface: v2.00
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>NET: Registered protocol family 23
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>Real Time Clock Driver v1.12ac
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>usb 6-1: new high speed USB device using ehci_hcd and address 2
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>usb 6-1: configuration #1 chosen from 1 choice
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>Driver 'sr' needs updating - please use bus_type methods
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (41 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (33 C)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usb 6-1: New USB device found, idVendor=5986, idProduct=0102
>usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 6-1: Product: Acer Crystal Eye webcam
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input13
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input14
>ACPI: Sleep Button (CM) [SLPB]
>input: Acer hotkey driver as /devices/virtual/input/input15
>Acer Travelmate hotkey driver v0.5.35
>ACPI: WMI: Mapper loaded
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>hub 7-0:1.0: unable to enumerate USB device on port 1
>PCI: Enabling device 0000:0f:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:0f:06.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi5 : ata_piix
>scsi6 : ata_piix
>ata6: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata7: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ata6.00: configured for UDMA/33
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=0458, idProduct=0036
>usb 3-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 3-1: Product: NetScroll + Mini Traveler
>usb 3-1: Manufacturer: Genius
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>sr 5:0:0:0: Attached scsi generic sg1 type 5
>usbcore: registered new interface driver hiddev
>input: Genius NetScroll + Mini Traveler as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input16
>input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:1d.0-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:30:af:eb
>wlan0: authenticate with AP 00:1d:7e:30:af:eb
>wlan0: authenticate with AP 00:1d:7e:30:af:eb
>wlan0: authentication with AP 00:1d:7e:30:af:eb timed out
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
>iwl3945: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: MAC is in deep sleep!
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: MAC is in deep sleep!
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: MAC is in deep sleep!
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>tg3: eth0: Link is down.
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>ata6.00: disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:0f:06.2 disabled
>acer-wmi: Acer Laptop WMI Extras unloaded
>acerhk: removed.
>ehci_hcd 0000:00:1d.7: remove, state 4
>usb usb7: USB disconnect, address 1
>ehci_hcd 0000:00:1d.7: USB bus 7 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1a.7: remove, state 1
>usb usb6: USB disconnect, address 1
>usb 6-1: USB disconnect, address 2
>ehci_hcd 0000:00:1a.7: USB bus 6 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>uhci_hcd 0000:00:1d.2: remove, state 4
>usb usb5: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 4
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 1
>usb usb3: USB disconnect, address 1
>usb 3-1: USB disconnect, address 2
>uhci_hcd 0000:00:1d.0: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1a.1: remove, state 4
>usb usb2: USB disconnect, address 1
>uhci_hcd 0000:00:1a.1: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: remove, state 84
>usb usb1: USB disconnect, address 1
>uhci_hcd 0000:00:1a.0: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>iTCO_wdt: Watchdog Module Unloaded.
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>ACPI: PCI interrupt for device 0000:0f:06.3 disabled
>nsc-ircc 00:0a: disabled
>usbcore: deregistering interface driver uvcvideo
>device-mapper: core: cleaned up
>NET: Unregistered protocol family 17
>ACPI: WMI: Mapper unloaded
>Uniform CD-ROM driver unloaded
>iTCO_vendor_support: Module Unloaded
>NET: Unregistered protocol family 23
>usbcore: deregistering device driver usb
>usbcore: deregistering interface driver usbfs
>usbcore: deregistering interface driver hub
>Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Shrinking memory...  -\|/-\|/-done (113185 pages freed)
>PM: Freed 452740 kbytes in 1.26 seconds (359.31 MB/s)
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Preparing to enter system sleep state S4
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>NOHZ: local_softirq_pending 100
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>PM: Creating hibernation image: 
>PM: Need to copy 125364 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3988.62 BogoMIPS (lpj=7977249)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Writing back config space on device 0000:00:1a.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.2 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing cabe0000)
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 100102)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b)
>PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820)
>PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007)
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:0f:06.2 at offset f (was 407010b, writing 40701ff)
>PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 803910, writing 804000)
>PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100102, writing 2100402)
>PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100106, writing 2100102)
>sd 0:0:0:0: [sda] Starting disk
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: _GTF unexpected object type 0x1
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Restarting tasks ... done.
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi7 : ata_piix
>scsi8 : ata_piix
>ata8: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata9: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata8.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata8.00: configured for UDMA/33
>scsi 7:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>PCI: Enabling device 0000:0f:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:0f:06.2 to 64
>Driver 'sr' needs updating - please use bus_type methods
>ACPI: WMI: Mapper loaded
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 7:0:0:0: Attached scsi CD-ROM sr0
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 7:0:0:0: Attached scsi generic sg1 type 5
>input: Acer hotkey driver as /devices/virtual/input/input17
>Acer Travelmate hotkey driver v0.5.35
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input19
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input20
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (33 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (28 C)
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input21
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>usb 1-1: New USB device found, idVendor=5986, idProduct=0102
>usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-1: Product: Acer Crystal Eye webcam
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Linux video capture interface: v2.00
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>input: PC Speaker as /devices/platform/pcspkr/input/input22
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input23
>Real Time Clock Driver v1.12ac
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>NET: Registered protocol family 23
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>NET: Registered protocol family 17
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>NET: Unregistered protocol family 17
>device-mapper: core: cleaned up
>nsc-ircc 00:0a: disabled
>ACPI: PCI interrupt for device 0000:0f:06.3 disabled
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>usbcore: deregistering interface driver uvcvideo
>iTCO_wdt: Watchdog Module Unloaded.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>uhci_hcd 0000:00:1d.2: remove, state 4
>usb usb7: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 7 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 4
>usb usb6: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 6 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 4
>usb usb5: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1a.1: remove, state 4
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1a.1: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: remove, state 4
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1a.0: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ehci_hcd 0000:00:1d.7: remove, state 4
>usb usb2: USB disconnect, address 1
>ehci_hcd 0000:00:1d.7: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1a.7: remove, state 1
>usb usb1: USB disconnect, address 1
>usb 1-1: USB disconnect, address 2
>ehci_hcd 0000:00:1a.7: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>acerhk: removed.
>acer-wmi: Acer Laptop WMI Extras unloaded
>ACPI: PCI interrupt for device 0000:0f:06.2 disabled
>ata8.00: disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>NET: Unregistered protocol family 23
>iTCO_vendor_support: Module Unloaded
>ACPI: WMI: Mapper unloaded
>Uniform CD-ROM driver unloaded
>usbcore: deregistering device driver usb
>usbcore: deregistering interface driver usbfs
>usbcore: deregistering interface driver hub
>Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Shrinking memory...  -\|/-\|done (62490 pages freed)
>PM: Freed 249960 kbytes in 0.89 seconds (280.85 MB/s)
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Preparing to enter system sleep state S4
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>NOHZ: local_softirq_pending 100
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>PM: Creating hibernation image: 
>PM: Need to copy 126179 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.65 BogoMIPS (lpj=7981314)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Writing back config space on device 0000:00:1a.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.2 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing cabe0000)
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 40100102)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b)
>PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820)
>PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007)
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:0f:06.2 at offset f (was 407010b, writing 40701ff)
>PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 803910, writing 804000)
>PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100102, writing 2100402)
>PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100106, writing 2100102)
>sd 0:0:0:0: [sda] Starting disk
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: _GTF unexpected object type 0x1
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Restarting tasks ... done.
>NET: Registered protocol family 17
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>NET: Registered protocol family 23
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>Real Time Clock Driver v1.12ac
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>input: PC Speaker as /devices/platform/pcspkr/input/input24
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input25
>Linux video capture interface: v2.00
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>usb 6-1: new high speed USB device using ehci_hcd and address 2
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input26
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (40 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (34 C)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input27
>usb 6-1: configuration #1 chosen from 1 choice
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input28
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input29
>ACPI: Sleep Button (CM) [SLPB]
>input: Acer hotkey driver as /devices/virtual/input/input30
>Acer Travelmate hotkey driver v0.5.35
>usb 6-1: New USB device found, idVendor=5986, idProduct=0102
>usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 6-1: Product: Acer Crystal Eye webcam
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: WMI: Mapper loaded
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>Driver 'sr' needs updating - please use bus_type methods
>PCI: Enabling device 0000:0f:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:0f:06.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi9 : ata_piix
>scsi10 : ata_piix
>ata10: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata11: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata10.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata10.00: configured for UDMA/33
>scsi 9:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 9:0:0:0: Attached scsi CD-ROM sr0
>sr 9:0:0:0: Attached scsi generic sg1 type 5
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>ata10.00: disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:0f:06.2 disabled
>acer-wmi: Acer Laptop WMI Extras unloaded
>acerhk: removed.
>ehci_hcd 0000:00:1d.7: remove, state 4
>usb usb7: USB disconnect, address 1
>ehci_hcd 0000:00:1d.7: USB bus 7 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1a.7: remove, state 1
>usb usb6: USB disconnect, address 1
>usb 6-1: USB disconnect, address 2
>ehci_hcd 0000:00:1a.7: USB bus 6 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>uhci_hcd 0000:00:1d.2: remove, state 4
>usb usb5: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 4
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 4
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1a.1: remove, state 4
>usb usb2: USB disconnect, address 1
>uhci_hcd 0000:00:1a.1: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: remove, state 84
>usb usb1: USB disconnect, address 1
>uhci_hcd 0000:00:1a.0: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>iTCO_wdt: Watchdog Module Unloaded.
>usbcore: deregistering interface driver uvcvideo
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>ACPI: PCI interrupt for device 0000:0f:06.3 disabled
>nsc-ircc 00:0a: disabled
>device-mapper: core: cleaned up
>NET: Unregistered protocol family 17
>Uniform CD-ROM driver unloaded
>ACPI: WMI: Mapper unloaded
>iTCO_vendor_support: Module Unloaded
>usbcore: deregistering device driver usb
>usbcore: deregistering interface driver usbfs
>usbcore: deregistering interface driver hub
>NET: Unregistered protocol family 23
>Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Shrinking memory...  -\|/-done (42109 pages freed)
>PM: Freed 168436 kbytes in 0.91 seconds (185.09 MB/s)
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Preparing to enter system sleep state S4
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>PM: Creating hibernation image: 
>PM: Need to copy 125608 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.63 BogoMIPS (lpj=7981266)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Writing back config space on device 0000:00:1a.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.2 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing cabe0000)
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 100102)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b)
>PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820)
>PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007)
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:0f:06.2 at offset f (was 407010b, writing 40701ff)
>PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 803910, writing 804000)
>PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100102, writing 2100402)
>PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100106, writing 2100102)
>sd 0:0:0:0: [sda] Starting disk
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: _GTF unexpected object type 0x1
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Restarting tasks ... done.
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi11 : ata_piix
>scsi12 : ata_piix
>ata12: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata13: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata12.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata12.00: configured for UDMA/33
>scsi 11:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>PCI: Enabling device 0000:0f:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:0f:06.2 to 64
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 11:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 11:0:0:0: Attached scsi generic sg1 type 5
>ACPI: WMI: Mapper loaded
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>input: Acer hotkey driver as /devices/virtual/input/input31
>Acer Travelmate hotkey driver v0.5.35
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input32
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input33
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input34
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (31 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (26 C)
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input35
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>usb 1-1: New USB device found, idVendor=5986, idProduct=0102
>usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-1: Product: Acer Crystal Eye webcam
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Linux video capture interface: v2.00
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>input: PC Speaker as /devices/platform/pcspkr/input/input36
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input37
>Real Time Clock Driver v1.12ac
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>NET: Registered protocol family 23
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>NET: Registered protocol family 17
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>NET: Unregistered protocol family 17
>device-mapper: core: cleaned up
>nsc-ircc 00:0a: disabled
>ACPI: PCI interrupt for device 0000:0f:06.3 disabled
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>usbcore: deregistering interface driver uvcvideo
>iTCO_wdt: Watchdog Module Unloaded.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>uhci_hcd 0000:00:1d.2: remove, state 4
>usb usb7: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 7 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 4
>usb usb6: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 6 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 4
>usb usb5: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1a.1: remove, state 4
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1a.1: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: remove, state 4
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1a.0: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ehci_hcd 0000:00:1d.7: remove, state 4
>usb usb2: USB disconnect, address 1
>ehci_hcd 0000:00:1d.7: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1a.7: remove, state 1
>usb usb1: USB disconnect, address 1
>usb 1-1: USB disconnect, address 2
>ehci_hcd 0000:00:1a.7: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>acerhk: removed.
>acer-wmi: Acer Laptop WMI Extras unloaded
>ACPI: PCI interrupt for device 0000:0f:06.2 disabled
>ata12.00: disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>NET: Unregistered protocol family 23
>iTCO_vendor_support: Module Unloaded
>ACPI: WMI: Mapper unloaded
>Uniform CD-ROM driver unloaded
>usbcore: deregistering device driver usb
>usbcore: deregistering interface driver usbfs
>usbcore: deregistering interface driver hub
>Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Shrinking memory...  -\|done (20452 pages freed)
>PM: Freed 81808 kbytes in 1.41 seconds (58.01 MB/s)
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Preparing to enter system sleep state S4
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>PM: Creating hibernation image: 
>PM: Need to copy 124856 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.62 BogoMIPS (lpj=7981252)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>Switched to high resolution mode on CPU 1
>CPU1 is up
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Writing back config space on device 0000:00:1a.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1a.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.1 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.2 at offset 1 (was 2800005, writing 2800001)
>PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900106, writing 2900102)
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing cabe0000)
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 40100102)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b)
>PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820)
>PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007)
>ACPI: PCI Interrupt 0000:0f:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:0f:06.2 at offset f (was 407010b, writing 40701ff)
>PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 803910, writing 804000)
>PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100102, writing 2100402)
>PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100106, writing 2100102)
>sd 0:0:0:0: [sda] Starting disk
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: _GTF unexpected object type 0x1
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Restarting tasks ... done.
>NET: Registered protocol family 17
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>NET: Registered protocol family 23
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Supports SIR Mode only
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>Real Time Clock Driver v1.12ac
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>input: PC Speaker as /devices/platform/pcspkr/input/input38
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input39
>Linux video capture interface: v2.00
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r195)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff1084a6]
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:10:84:a6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>usb 6-1: new high speed USB device using ehci_hcd and address 2
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: device:05 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input40
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (39 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (32 C)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input41
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input42
>usb 6-1: configuration #1 chosen from 1 choice
>uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input43
>ACPI: Sleep Button (CM) [SLPB]
>input: Acer hotkey driver as /devices/virtual/input/input44
>Acer Travelmate hotkey driver v0.5.35
>ACPI: WMI: Mapper loaded
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>usb 6-1: New USB device found, idVendor=5986, idProduct=0102
>usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 6-1: Product: Acer Crystal Eye webcam
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Driver 'sr' needs updating - please use bus_type methods
>PCI: Enabling device 0000:0f:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:0f:06.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi13 : ata_piix
>scsi14 : ata_piix
>ata14: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata15: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata14.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata14.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Radio disabled by HW RF Kill switch
>scsi 13:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 13:0:0:0: Attached scsi CD-ROM sr0
>sr 13:0:0:0: Attached scsi generic sg1 type 5
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 22
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>hub 7-0:1.0: unable to enumerate USB device on port 2
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>input: Genius NetScroll + Mini Traveler as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input45
>input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:1d.0-2
>usb 3-2: New USB device found, idVendor=0458, idProduct=0036
>usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 3-2: Product: NetScroll + Mini Traveler
>usb 3-2: Manufacturer: Genius

Actions: View

Attachments on bug 18099: 3112 | 3119 | 3120 | 3121 | 3122 | 3123